Diff for "RealTime_User_Manual"

User Manual for REAL TIME DATA ANALYSIS

CROSS:

1. edit todo_cross.pro, update scan_num, day and the reference detectors if needed.

2. in idl, type .r todo_cross

3. the corrections are output on the plots (or in offset1 and offset2). These corrections must be added as is to your current values of pointing offsets.

FOCUS:

1. edit todo_focus.pro, update scan_num, day and the reference detectors if needed.

2. in idl, type .r todo_focus

3. The returned value of the focus must be passed to PAKO as is.

OTF Geometry:

Please read this at least once carefully:

Update get_info.pro for the relevant scan_num and day

launch crun.pro on sami and on the laptop if kids selection has to be redone

if select_kids needed, transfer data to laptop and follow todo_otf_geometry

scp *save archeops@192.168.1.32:/home/archeops/Data/Iram/Save/.

follow todo_otf_geometry

Updater nika_lib_init avec les nouvelles kidpar_ref

.

.

.

.

. .

1. Login on Sami with username archeops and the usual passwd. You are then in the Home directory 2. From a terminal window type: emacs todo_NameOfProcedure.pro & 3. This file to have examples of input parameters of the real time analyses to use

1. General Info:
   • all the products of the real time data analysis (.png, .fits, .save) are stored in this folder ………..;
   • the parameter scan_num (number of scan) is an integer
   • the parameter day (date of the scan) is a string as 'yearmonthday' (ex: '20121120')
2. Preliminary actions:
   • start idl
3. POINTING PROCEDURE:

Determine pointing offset by making 4 subscans (see pointing Pako procedure on …….).

• Open the IDL script RealTime/todo_cross.pro
• execute line X1 updating scan_num and day parameters.
• execute 'cross, scan_num, day, offsets, info=info'

……………………………

• execute print,offset

offset returns the value of the RELATIVE offset for the two arrays wrt previous value set in Pako. The value obtained from 1mm array has to be considered as priority.

1. FOCUS PROCEDURE

The procedure intends to maximize the power on one reference pixel (where the considered source is centered) when the position of the secondary mirror is changed by X steps (see Pako procedure on …..).

• Edit the IDL script RealTime/todo_focus.pro
• execute line X1 updating scan_num and day parameters.
• execute 'focus, scan_num, day, z_final, info=info'

the procedure produces 4 plots, 2 for each array. Two plots, one for 2mm array and the other for 1mm array, show the TOD of the procedure. (and the fraction of the plateau chosen for the analysis (in green). Plots IDL33 (2mm array) and IDL35 (1mm array) show the total power (in Hertz!) versus the position of the secondary, for reference pixel (top right in red) and for nearby pixels (9). The best position is fitted with a second order polynomial.

• execute print, z_final

z_final returns the values of the ABSOLUTE best position of the secondary mirror for the two arrays (z_final(0)=best pos 2mm - z_final(1)=best pos 1mm). The value obtained from 1mm array has to be considered as priority.

1. SELECT KIDS PROCEDURE

This procedure computes individual maps to determine the kids parameters that can be upgraded in otf_geometry. This procedure should be run only once at the beginning of the campaign.

• Open the IDL script RealTime/todo_x.pro
• execute from line X1 to line X2
• execute 'select_kids, scan_num, day, info=info'

1. OTF GEOMETRY PROCEDURE
   • Open the IDL script RealTime/todo_x.pro
   • execute from line X1 to line X2
   • execute 'otf_geometry, scan_num, day, info=info'