Size: 2428
Comment:
|
Size: 2432
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 41: | Line 41: |
---- |
240 GHz band
Array: Same as runs4,5,6. NICA 8e, 20nm Al IRAM. LO 1.955GHz, power per tone -50dBm (at cryostat input).
Pixels: pitch 1600 x 1600 micron. 224 pixels on design (16x16 array minus the corners). About 190 useful pixels.
Cold electronics: SiGe Caltech amplifier "Florence" (gain 40dB, 1dB compression point 0dBm integrated power, Noise T around 6K).
Warm electronics: NIKEL01. RF source 192.168.1.196 (IFR 2024 Leasametric). 0dB attenuation at cryo IN. DAC 2, niv 3. VLF2500 low-pass filter at cryostat input.
Optics and spectrum: Same optical configuration as run 4 and 5. Except one filter (LPE 9cm-1) less compared to run 6. Also, using corrugated lenses (were smooth in previous runs) at 4K and 100mK. Spectrum peaking at 270 GHz (FWHM=230-290GHz).
Figure: Response spectrum measured in Grenoble on the 1mm array used for run7. Run PT33 (for more information see ELOG).
Please find below the data for the spectrum on the pixel 1 (frequency(GHz), Response (AU)): TO BE ADDED
150 GHz band
Array: NICA8f1, 18nm Al film made at IEF, litho PTA. LO 1.35GHz, power per tone -54dBm (at cryostat input).
Pixels: pitch 2305 x 2305 micron. 132 pixels on design (12x12 array minus the corners). 129 identified resonances, at least 125 useful pixels.
Cold electronics: SiGe Caltech amplifier SN 84 (unchanged), (gain 40dB, 1dB compression point 0dBm integrated power, noise T around 4K).
Warm electronics: NIKEL02, RF source 192.168.1.192 (IFR 2025 IRAM), 3dB attenuation at cryo IN, starting DAC 2, niv 3. VLF2250 at cryostat input.
Optics and spectrum: Same optical configuration as run 4,5,6. Just using corrugated lenses (were smooth in previous runs) at 4K and 100mK. Spectrum peaking at 155 GHz.
Figure: Response spectrum measured in Grenoble on the 2mm array used for run 7 (FWHM=135-170GHz). Run PT33 (for more information see ELOG).
Please find below the data for the spectrum on the pixel 1 (frequency(GHz), Response (AU)): TO BE ADDED