|
Size: 2939
Comment:
|
Size: 2957
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 19: | Line 19: |
| ASCII data for the spectrum on the pixel 1 (frequency(GHz), Response (AU)): [[attachment:pix1_1mm.txt | pix1_1mm]] | ASCII data for the spectrum on the pixel 1 (frequency(GHz), Response (AU)): [[attachment:pix1_1mm.txt | pix1_1mm.txt]] |
| Line 21: | Line 21: |
| FITS interferograms data: [[attachment:interfer_1mm.fits | interf_1mm]] | FITS interferograms data: [[attachment:interfer_1mm.fits | interf_1mm.fits]] |
| Line 40: | Line 40: |
| ASCII data for the spectrum on the pixel 1 (frequency(GHz), Response (AU)): [[attachment:pix1_2mm.txt | pix1_2mm]] | ASCII data for the spectrum on the pixel 1 (frequency(GHz), Response (AU)): [[attachment:pix1_2mm.txt | pix1_2mm.txt]] |
| Line 42: | Line 42: |
| FITS interferograms data: [[attachment:interfer_2mm.fits | interf_2mm]] | FITS interferograms data: [[attachment:interfer_2mm.fits | interf_2mm.fits]] |
240 GHz band
Array: Same as runs 4,5,6. NICA 8e, 20nm Al IRAM (no bondings across-the-line). LO 1.955GHz, power per tone -54dBm (at cryostat input incl. 2m flex cables).
Pixels: pitch 1600 x 1600 micron. 224 pixels on design (16x16 array minus the corners). 196 identified resonances (about 20 more are higher in f, out of the NIKEL band), about 180-190 useful pixels.
Cold electronics: SiGe Caltech amplifier "Florence" (gain 40dB, 1dB compression point 0dBm integrated power, Noise T around 6K).
Warm electronics: NIKEL01. RF source 192.168.1.196 (IFR 2024 Leasametric). 0dB attenuation at cryo IN. DAC 20,23,20,25,32; niv 5 (measured -54dBm per tone at cryo input, including 2m flex cables). VLF2600 low-pass filter at cryostat input.
Optics and spectrum: Same optical configuration as run 4 and 5. Except one filter (LPE 9cm-1) less compared to run 6. Also, using corrugated lenses (were smooth in previous runs) at 4K and 100mK. Spectrum peaking at 270 GHz (FWHM=230-290GHz).
Figure: Response spectrum measured in Grenoble on the 1mm array used for run7. Run PT33 (for more information see ELOG).
ASCII data for the spectrum on the pixel 1 (frequency(GHz), Response (AU)): pix1_1mm.txt
FITS interferograms data: interf_1mm.fits
150 GHz band
Array: NICA8f1, 18nm Al film made at IEF, litho PTA. LO 1.363GHz, power per tone -55dBm (at cryostat input incl. 2m flex cables).
Pixels: pitch 2305 x 2305 micron. 132 pixels on design (12x12 array minus the corners). 128 identified resonances, at least 125 useful pixels.
Cold electronics: SiGe Caltech amplifier SN 84 (unchanged), (gain 40dB, 1dB compression point 0dBm integrated power, noise T around 4K).
Warm electronics: NIKEL02, RF source 192.168.1.192 (IFR 2025 IRAM), 3dB attenuation at cryo IN, DAC 20,23,20,27,35; niv 5 (measured -55dBm per tone at cryo input, including 2m flex cables). VLF2250 low pass filter at cryostat input.
Optics and spectrum: Same optical configuration as run 4,5,6. Just using corrugated lenses (were smooth in previous runs) at 4K and 100mK. Spectrum peaking at 146 and 160 GHz.
Figure: Response spectrum measured in Grenoble on the 2mm array used for run 7 (FWHM=135-170GHz). Run PT33 (for more information see ELOG).
ASCII data for the spectrum on the pixel 1 (frequency(GHz), Response (AU)): pix1_2mm.txt
FITS interferograms data: interf_2mm.fits