|
Size: 4134
Comment:
|
Size: 4195
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 55: | Line 55: |
| || 172-176 || 1803+784 || +0.16 || 1.0 || 1.24 || Started at 1.0; custom; Ar2 not well determined|| | || 172-176 || 1803+784 || +0.16 || 1.0 || 1.24 || Started at 1.0; custom; Ar2 not well determined; see Tapas for further interesting features of this sequence|| |
Daily Reports (2025/10/21-28, NIKA2 run 75, Cryo run 87)
Observers on-site: Monica Rodriguez, Samuel Leclercq, Raphaël Maris, Stefano Berta and Stergios Amarantidis (AoD).
Remote observers: Michael Mattern (Saturday-Tuesday).
Operators: Sergio and Mario.
Shifts: 10-16 Raphaël; 16-22 Samuel; 22-4 Stefano; 4-10 Monica.
All times reported are in UTC (if not mentioned otherwise).
Preparatory notes
Please, remember to use the focus value of Ar1 (roughly Ar2 + 0.65 mm, but use directly the focus Ar1 monitor if possible). Please use the custom modified focus script focusOTF-Z_2025.pako.
Therefore, importantly, when checking the quality of the beam on a pointing map to decide if a new focus is needed, it is better to do it on the Ar1 map, because that's the one focused at best.
Project D01-25 (M51) requires DAQ restarting with the run87_newSweep_M51_tp.ini file. Come back to run87_neSweep_tp.ini after observing this project.
Please fill the Table with the Ar1,2,3 focus values as follows. At best, make one table per day.
Focus sequences
Scan nr
Target
Ar2
Ar1
Ar3
Notes
Similarly, if any beam maps are taken:
Beam maps (99 sub-scans)
Scan Nr
Target
Focus
Notes
October 21st, 2025, Tuesday
15:00-22:00[All]: Maintenance finished with no issues. DAQ started at 14:10 with 21/3/47 bad KIDS for arrays 1,2 and 3, respectively. Repeating the DAQ at 14:24 with 28/3/89. Trying to point at NGC7027 and MWC349 but the weather is too unstable (p2p~10-20Jy/beam), moving to K3-50A for pointing and focus (using the modified 2025 script). Moving for calib_1scan to MWC349, etc. Switching to project 053-25 (source 1803+784 is better for pointing/focus). One repetition of L1157B. Around 17:12 we moved to a skydip and then to the normal flux calibrators. After pointing/focus on 1803+784 we move to project 022-25. Two repetitoins of Ceph-4.
22:00-04:00[Stefano]: ...
Focus sequences of 2025/10/21
Scan nr
Target
Ar2
Ar1
Ar3
Notes
20251021s109-113
K3-50A
+0.10
+0.61
+0.80
Started at 1mm, custom script, array 2 out of range
s114-118
K3-50A
+0.02
+0.60
+0.82
Started at 0.61mm, custom script
s131-135
1803+784
...
+0.56
+0.75
Started at 0.6mm, custom script, array 2 out of range
s147-151
1803+784
+0.15
+0.68 to +0.77
+1.00
Started at 0.56mm, custom script; focus set to 0.68
162-166
1803+784
+0.33
+1.1
...
Started at 0.8 mm, custom; Ar1 based on FWHM only; Ar3 out of range
167-171
1803+784
problems with the new make-imbf of scan 171
172-176
1803+784
+0.16
1.0
1.24
Started at 1.0; custom; Ar2 not well determined; see Tapas for further interesting features of this sequence
October 22nd, 2025, Wednesday
04:00-10:00[Monica]: ...
10:00-16:00[Raphaël]: ...
16:00-22:00[Samuel]: ...
22:00-04:00[Stefano]: ...
Focus sequences
Scan nr
Target
Ar2
Ar1
Ar3
Notes
21:00-03:00[]: ...
Focus sequences
Scan nr
Target
Ar2
Ar1
Ar3
Notes