Go back to PoolObserving

You should use Iceweasel(=firefox) to open the database. The current version of Konqueror seems to have problems.

How to start the pool session with the NCS

Starting the gopool daemon

This daemon is used to upload the heterodyne scans. Ask the operator to do the following:

ssh -X mrt@mrt-lx3
./gopool

Login at the control room

ssh -X pools08@mrt-lx7.iram.es (for Observer, ask operator or AoD for passwd)
ssh -X flexible@mrt-lx4.iram.es (for MOPSIC, ask operator or AoD for passwd)

Start Pako in mrt-lx1

Go to "paKo" virtual desktop.
Open a paKo terminal (same passwd as for the pool account).
goPako (setup the pako session).
pakitoDisplay (open a window with the paKo output).
pako (enter in the paKo program).
@ wbolo (setup symbols, etc.)
@ last (run last saved commands)

Start the observation monitoring in mrt-lx4:0.1

    - Go to "ObsMonitor" virtual desktop.
    - Open a paKo terminal (same passwd as for the pool account).
    - > antDisplay (start the observation monitoring) {X} Deprecated
    - Open the web browser konqueror and open various Tab at the following URI (should be done on the Operator Screen):
       - file:/ncsServer/mrt/ncs/monitor/scanInfo.html  (Job Informations)
       - file:/ncsServer/mrt/ncs/observationQueues (look at the pool directory for the job submitted)
       - http://mrt-lx1/mainWiki  (internal wiki with informations for NCS, Pool, etc: Use it as a feedback for NCS and Pool)

Start Xephem

    - In the "Xephem" virtual desktop (mrt-lx4:0.0) open the xephem sw.
    - All the .edb files for the different projects should be available from there.

Open the pool database sessions in mrt-lx7:0.1

    - Ih the virtual desktop "DB Pool" and "DB LST" open a Iceweasel web broswer and logon to the IRAM  database with the account: observer/passwd (ask operator or AoD for passwd)
    - Open in the virtual desktop "BoloLog"  a pool database and the automatic BoloLog for bolometer observations.
    - If the observations are heterodyne, open the PakoLog sheet (OpenOffice) according to the project.

The virtual desktops maybe different, they are mainly for information.

Start the Mopsic monitoring

Go to the virtual desktop "Mopsic Monitor" in mrt-lx7:0.1
ssh flexible@mrt-lx3
cd monitor
mopsic @monitor (should appear in mrt-lx10:0.1). WARNIG: if a fits file is corrupted, it stops. Just restart it
In mrt-lx7:0.0 in the virtual desktop "MonitorAcc" open a terminal and connect to: > ssh flexible@mrt-lx3

For checking pointing and focus:

 - choose the monitor that is most confortable for you, eg, one were you can copy paste the corrections.
 - Open a terminal
   - ssh flexible@mrt-lx3 (ask the operator od AoD for password)
   - > cd monitor
   - > mopsic
       - @ psn ! for reducing the pointing
       - @ fsn ! for reducing the focus

For technical purposse:

     - > cd monInst
     - > mopsic @monInst (this starts a monitor to display possible instabilities in the data).

Meteo Monitoring

Go to the 30m homepage and check the weather pages for the Taumeter readings and weather predictions.
- Outdated:

     - In the virtual desktop "Taumeter" and "Meteosat" in mrt-lt70.0 open the monitor at the URI:
       - http://mrt-lx2.iram.es/tau/taumeter.html
       - http://www.inm.es/web/infmet/satel/sespan.html

Start Mira & Mopsic

    Mira:
    - Open a pako terminal in the pool account.
    - cd mira
    - mira
    - mira> @init  ! Look at the Mira manual then.

    Mopsic:
    - Open a pako terminal in the pool account
    - ssh flexible@mrt-lx3  (Ask the Operator or AoD for the password)
    - cd monitor
    - mopsic

Note: clean from time to time the monitor directory in flexible account with:

- rm *LOG*; rm *MES*

Back to Pool page: PoolObserving