Size: 2315
Comment:
|
Size: 4182
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 25: | Line 25: |
== Tracking == | == Encoder plots == |
Line 27: | Line 27: |
{{attachment:AntennaFast20151105t185327-1.png||width=550}} | * {{attachment:AntennaFast20151105t185327-1.png||width=550}} |
Line 29: | Line 29: |
== Scans (CM) == | * The Figure below shows in white the commanded, in red the encoder azimuth in antenna files 20151105t190827 till 20151105t192627. The commanded azimut shows as expected the zig-zag during the map 20151105s155 (start UT 05-NOV-2015 19:09:40) but is a straight line during the following map, i.e. during the oscillations. Why ? (RZ, 9-Nov-2015) {{attachment:antmd-20151105t190827_192627_az.png||width=550}} == Scans showing oscillations == === 26th November 2015 (CK) === * 27-Nov-2015: With NIKA2 we had one oscillation event: Scan 90.4, UT 18:16, wind 14m.s-1, EL 42 Using focusLiss script. Once oscillating going to slowRate 1 did not help. Later on the wind went down and we had no problem anymore. (Operator report by FD) * 26-Nov-2015: At the end of the shift, we had again backlashes and problems with the high currents (>50%) in azimut. Scan 86, standard lissajous for focus @ Uranus. (Az,el) = (111º, 34º), windy conditions, around 13 m/s from the East. We canceled before checking changing the slowRate. Scan 87 ok, and happened again with scan 88 (same observation mode). To change to slewRate 1 did not helped, we had to cancel. Now we are going to resume observations. (Operator report by JS) * 25-Nov-2015: Problems in the last observing hour for NIKA: the telescope suddenly went to the previous target observed in the middle of an scan. Several goOnce restarts and vac1 reboot did not helped. Detailed information send to WB. At the end of the run, scan 57, lissajous on Mars @ (141º,30º), wind from NE > 15 m/s, we started to have strong oscillations in azimuth (and the Az currents went > 57%). I cancelled before checking if to setSlowRate 1 helped (as suggested by JP in a previous mail), but when we resumed the observations the problem did not happened again. (Operator report by JS) === 5th and 8th November 2015 (CM) === |
Telescope oscillations
Contents
This page has been created by CK on 9-Nov-2015.
During the 1st NIKA-2 run in October/November 2015, the telescope occasionally showed strong and fast oscillations. Here, we collect all available information.
Summary of findings so far:
- Oscillations only occur with NIKA-2 and its 8Hz slow loop. With EMIR/HERA we did not notice such problems.
- They manifest themselves with strong Azimuth oscillations of 3arcmin peak-to-peak in Azimuth, while Elevation at the same time shows much weaker oscillations (see below). (AS)
- Oscillations show-up only when doing fast OTF maps with scanning speeds between 40"s and 55"/s.
- These OTF maps are done with very short subscan lengths of between 7.5sec and 11sec, only.
- The period of the oscillations is about 1sec. (AS)
- Motor encoder readings are OK. (JP 9-Nov-2015)
- Often the wind came from the North, the wind meter may have been partially blocked. For one scan, the measured wind velocity was 14m/s.
- Oscillations occur after one or more successful OTF scans on the same source.
- It seems that the oscillations are not repeatable, i.e. they don't occur always for the same script. On the contrary, the same otf script has been in use for several days, without problems.
- Elevations are normal, 24 to 41deg.
- It doesn't make a difference whether a track scan was done before the flaky scan, or not.
Encoder plots
The Figure below shows in white the commanded, in red the encoder azimuth in antenna files 20151105t190827 till 20151105t192627. The commanded azimut shows as expected the zig-zag during the map 20151105s155 (start UT 05-NOV-2015 19:09:40) but is a straight line during the following map, i.e. during the oscillations. Why ? (RZ, 9-Nov-2015)
Scans showing oscillations
26th November 2015 (CK)
- 27-Nov-2015: With NIKA2 we had one oscillation event: Scan 90.4, UT 18:16, wind 14m.s-1, EL 42 Using focusLiss script. Once oscillating going to slowRate 1 did not help. Later on the wind went down and we had no problem anymore. (Operator report by FD)
26-Nov-2015: At the end of the shift, we had again backlashes and problems with the high currents (>50%) in azimut. Scan 86, standard lissajous for focus @ Uranus. (Az,el) = (111º, 34º), windy conditions, around 13 m/s from the East. We canceled before checking changing the slowRate. Scan 87 ok, and happened again with scan 88 (same observation mode). To change to slewRate 1 did not helped, we had to cancel. Now we are going to resume observations. (Operator report by JS)
25-Nov-2015: Problems in the last observing hour for NIKA: the telescope suddenly went to the previous target observed in the middle of an scan. Several goOnce restarts and vac1 reboot did not helped. Detailed information send to WB. At the end of the run, scan 57, lissajous on Mars @ (141º,30º), wind from NE > 15 m/s, we started to have strong oscillations in azimuth (and the Az currents went > 57%). I cancelled before checking if to setSlowRate 1 helped (as suggested by JP in a previous mail), but when we resumed the observations the problem did not happened again. (Operator report by JS)
5th and 8th November 2015 (CM)
scan UT start Az/El wind(max) observing mode/script OTF parameters: x/ystart/x/yend/x/ystep/totf/notf/scan speed 20151105s152 18:53:19 110/34 3.9m/s otf (beammap.pako 2nd part) -300"/-112"/300"/-112"/0"/3.5"/11s/65/54.5" per s 20151105s156 19:22:58 116/39 5.8 otf (beammap.pako 2nd part) -300/-112/300/-112/0/3.5/11s/65/54.5" per s 20151105s158 19:35:19 118/41 5.2 otf (beammap.pako 2nd part) -300/-112/300/-112/0/3.5/11s/65/54.5" per s 20151108s43 01:36:53 338/24 14.2 otf (nkotf.pako 5 5 90 0 20 40 radec) 150/150/150/-150/-20/0/7.5s/16/40" per s