Size: 88
Comment:
|
← Revision 101 as of 2016-03-13 08:42:04 ⇥
Size: 7802
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
[[ NIKA2Run4 | Back to the NIKA2 Run4 page]] |
|
Line 5: | Line 2: |
Detailled description of specific observing sessions are given here. <<TableOfContents(4)>> '''[[ Nika2Run4 | Back to the NIKA2 Run4 page ]]''' ---- == Focus ANALYSIS == * Launch {{{ PAKO> @focusOTF-Z }}} * First analyse each of the scans individually {{{ IDL> nk_rta,'20160312s277',/nas,/xyguess,/largemap,rmax_keep=60,radius=60 }}} * Then get focus results from all scans {{{ IDL> nk_focus_liss_old, '20160313s'+strtrim(indgen(5)+106, 2), /nas, /xyguess, rmax_keep=60, get_focus_error=1, imzoom=1 }}} * Repeat previous analysis for {{{ PAKO @focusOTF-Y }}} and then for {{{ @focusOTF-X }}} == Focus z campaign == '''''Aim:''''' characterizing the variations of the best focus across NIKA2 field of view. Several "focus z sessions" were done in NIKA2 Run3. However, the outermost regions of the array, where the axial focus is expected to show the largest variations w.r.t. the center of the array (-24.5, 3.4), were mainly probed. Here, the objective is to characterize the curvature of the focal plane and to confirm its flatness in the inner part of the arrays. '''''Method:''''' We suggest to explore 2 perpendicular diameters in Nasmyth offset bins from 30 arcsec to 1 arcmin. The list of Nasmyth offsets is given at the end of the page ([[#offsetlist|jump to the offset list]]). For each Nasmyth offset location, the optimal axial focus is estimated from 5 x 1 arcmin square OTF scans at 5 different focus around the initial focus set in PAKO using the command "focusOTF". In each map produced using NK_RTA, the main beam is fitted using a 2D Gaussian function. Two optimal z focus estimates are fitted using NK_FOCUS_LISS_OLD, which resorts to a polynomial POLY_FIT function: the focus z that maximises the flux at the beam peak and the focus z that minimizes the main beam FWHM, the former being usually more precise. '''''Analysis:''''' Several focus z campaigns were done during NIKA2 run 3, and were analysed. For information, a compilation of the results is available in the NIKA2 private page in [[http://www.iram.fr/wiki/nika2/index.php/Focus_variation_across_the_focal_plane]]. '''referent person: Laurence Perotto (laurence.perotto@lpsc.in2p3.fr), Jean-François Lestrade''' ----- === Commands sequence === Below the detailled sequence of commands to be run is given. ==== 1./ source selection ==== Choose a bright point source of several Jy (e.g. 3C84, 3C273, 3C279, 1156+295, ...) NB: Although 3C286 has also been used during Run 3, it is not bright enough (0.3 Jy) to yield very good focus measurements. {{{ PAKO> source 3C273 PAKO> track PAKO> start }}} ==== 2./ pointing correction ==== Reminder: There are 2 methods, the pointing lissajous resorts to a small lissajous around the source, whereas the pointing cross does 2 perpendicular scans across the source. The pointing lissajous is often more reliable when the reference pixel is off-centered in Nasmyth coordinates (whenever the pointing model is not implemented after a proper pointing session). {{{ PAKO>@nkpoint l }}} or {{{ PAKO>@nkpoint b }}} in case of poor fit with a lissajous, try resorting to the 'common_mode_kids_out' method" by running IDL> nk_rta, 'scan', /mask {{{ PAKO>set pointing xx yy }}} ==== 3./ best focus at the array center z_0 ==== {{{ PAKO>offset -24.5, 3.4 /sys nasmyth PAKO>@focusOTF enter 0 as the central focus z value z_c }}} It will run 5 scans at focus z_c-0.8; z_c-0.4; z_c; z_c+0.4; z_c+0.8 Analyse each scan individualy using: {{{ IDL> nk_rta, '20160303s1', /nas, /xyguess, /largemap, rmax_keep=30, radius=35, /nopng }}} once the 5 scans are reduced, run (for ex.): {{{ IDL> nk_focus_liss_old, '20160303s'+strtrim([1,2,3,4,5], 2), /nas, /xyguess, rmax_keep=30, get_focus_error=1, imzoom=1 }}} ''NB: if the optimal focus value is far from zero (abs(z_0) > 0.3), reiterate in ingesting the optimal focus value as the central focus z_c asked by @focusOTF'' ==== 4./ best focus across the field-of-view z_{off-center} ==== {{{ PAKO>offset 'xoff' 'yoff' \sys nasmyth PAKO>@focusOTF enter a central focus value z_c not too far from the optimal focus z. }}} Analyse each scan individualy using: {{{ IDL> nk_rta, '20160304s1', /nas, /xyguess, /largemap, rmax_keep=30, radius=35, /nopng }}} once the 5 scans are reduced, run (for ex.): {{{ IDL> nk_focus_liss_old, '20160304s'+strtrim([1,2,3,4,5], 2), /nas, /xyguess, rmax_keep=30, get_focus_error=1, imzoom=1 }}} Please keep track of the ('xoff', 'yoff') in TAPAS for easier analysis of the campaign results the list of nasmyth coordinates to be explored can be read on the A2 printed sheet. [OPTIONAL: ] In case the focus@1mm and the focus@2mm are very discrepant, the focus exploration bin (-0.8, +0.8) may be not sufficient to fit simultaneously f_1 and f_2. Relaunch @focusOTF using the central focus z_c=<f_2>, where <f_2> is as close as possible to the focus@2mm value ==== 5./ monitoring of the focus temporal drift ==== Since we are interested in the difference between f_0 and various f_{off-center}, f_0 should be regularly checked (every few points depending on its stability). re-iterate 3/ after 4 focus z measurements at off-centered Nasmyth offsets. === List of Nasmyth offsets (version 18 points) === <<Anchor(offsetlist)>> ||<tablewidth="55%" #AAAAFF :> Info ||<#AAAAFF :>Nasmyth offsets||<#AAAAFF :> A1 kid numdet || ||<rowspan=3 :> first half of the main diameter||<)> 81.2, -104.6||<)> 4584|| ||<)> 43.8, -69.2||<)> 4252|| ||<)> 25.9, -39.1||<)> 3941|| ||<rowbgcolor="#FFFFAA" :>center of the array||<)> -24.5, 3.4||<)> 3385|| ||<rowspan=4 :> second half of the main diameter||<)> -53.3, 41.5||<)> 2827|| ||<)> -89.7, 68.1||<)> 2571|| ||<)> -118.5, 106.7||<)> 2166|| ||<)> -143.6, 125.8||<)> 1938|| ||<rowspan=6 :> 2nd diameter ||<)> -120.2, -89.8||<)> 4016|| ||<)> -79.6, -55.4||<)> 3847|| ||<)> -54.0, -39.0||<)> 3769|| ||<)> 25.2, 49.7||<)> 2979|| ||<)> 57.9, 81.7||<)> 2738|| ||<)> 82.3, 106.5||<)> 2512|| ||<rowspan=4 :> circle ||<)> -123.7, 3.8||<)> 3068|| ||<)> 63.4, 14.1||<)> 3548|| ||<)> -22.3, -84.7||<)> 4202|| ||<)> -28.6, 107.4||<)> 2335|| {{attachment:nasmyth_offset_focus_session_march2016_v2.png|nasmyth_offset_focus_session_march2016_v2.png|width=600 height=600}} === OLD List of Nasmyth offsets (version 22 points) === '''[DO NOT USE]''' ||<tablewidth="55%" #BFBFBF :> Info ||<#BFBFBF :>Nasmyth offsets||<#BFBFBF :> A1 kid numdet || ||<rowspan=4 :> first half of the main diameter||<)> 92.9, -112.2||<)> 4591|| ||<)> 79.3, -95.7||<)> 4494|| ||<)> 53.3, -67.0||<)> 4251|| ||<)> 25.9, -39.1||<)> 3941|| ||<rowbgcolor="#BFBFBF" :>center of the array||<)> -24.5, 3.4||<)> 3385|| ||<rowspan=5 :> second half of the main diameter||<)> -53.3, 41.5||<)> 2827|| ||<)> -89.7, 68.1||<)> 2571|| ||<)> -104.8, 89.9||<)> 2344|| ||<)> -130.4, 113.7||<)> 2015|| ||<)> -155.3, 133.1||<)> 1871|| ||<rowspan=12 :> other points ||<)> 38.6, 78.1||<)> 2740|| ||<)> -79.6, -55.4||<)> 3847|| ||<)> 63.4, 14.1||<)> 3548|| ||<)> -123.7, 3.8||<)> 3068|| ||<)> -28.6, 107.4||<)> 2335|| ||<)> -22.3, -84.7||<)> 4202|| ||<)> -135.7, -104.3||<)> 4173|| ||<)> -110.9, -87.6||<)> 4021|| ||<)> -54.0, -39.0||<)> 3769|| ||<)> 25.2, 49.7||<)> 2979|| ||<)> 65.1, 93.8||<)> 2664|| ||<)> 90.0, 118.1||<)> 2497|| {{attachment:nasmyth_offset_focus_session_march2016.png|nasmyth_offset_focus_session_march2016.png|width=600 height=600}} [[attachment:nasmyth_offset_focus_session_march2016.eps]] |
Observation campaign description
Detailled description of specific observing sessions are given here.
Focus ANALYSIS
* Launch
PAKO> @focusOTF-Z
* First analyse each of the scans individually
IDL> nk_rta,'20160312s277',/nas,/xyguess,/largemap,rmax_keep=60,radius=60
* Then get focus results from all scans
IDL> nk_focus_liss_old, '20160313s'+strtrim(indgen(5)+106, 2), /nas, /xyguess, rmax_keep=60, get_focus_error=1, imzoom=1
* Repeat previous analysis for
PAKO @focusOTF-Y
and then for
@focusOTF-X
Focus z campaign
Aim: characterizing the variations of the best focus across NIKA2 field of view. Several "focus z sessions" were done in NIKA2 Run3. However, the outermost regions of the array, where the axial focus is expected to show the largest variations w.r.t. the center of the array (-24.5, 3.4), were mainly probed. Here, the objective is to characterize the curvature of the focal plane and to confirm its flatness in the inner part of the arrays.
Method: We suggest to explore 2 perpendicular diameters in Nasmyth offset bins from 30 arcsec to 1 arcmin. The list of Nasmyth offsets is given at the end of the page (jump to the offset list). For each Nasmyth offset location, the optimal axial focus is estimated from 5 x 1 arcmin square OTF scans at 5 different focus around the initial focus set in PAKO using the command "focusOTF". In each map produced using NK_RTA, the main beam is fitted using a 2D Gaussian function. Two optimal z focus estimates are fitted using NK_FOCUS_LISS_OLD, which resorts to a polynomial POLY_FIT function: the focus z that maximises the flux at the beam peak and the focus z that minimizes the main beam FWHM, the former being usually more precise.
Analysis: Several focus z campaigns were done during NIKA2 run 3, and were analysed. For information, a compilation of the results is available in the NIKA2 private page in http://www.iram.fr/wiki/nika2/index.php/Focus_variation_across_the_focal_plane.
referent person: Laurence Perotto (laurence.perotto@lpsc.in2p3.fr), Jean-François Lestrade
Commands sequence
Below the detailled sequence of commands to be run is given.
1./ source selection
Choose a bright point source of several Jy (e.g. 3C84, 3C273, 3C279, 1156+295, ...) NB: Although 3C286 has also been used during Run 3, it is not bright enough (0.3 Jy) to yield very good focus measurements.
PAKO> source 3C273 PAKO> track PAKO> start
2./ pointing correction
Reminder: There are 2 methods, the pointing lissajous resorts to a small lissajous around the source, whereas the pointing cross does 2 perpendicular scans across the source. The pointing lissajous is often more reliable when the reference pixel is off-centered in Nasmyth coordinates (whenever the pointing model is not implemented after a proper pointing session).
PAKO>@nkpoint l
or
PAKO>@nkpoint b
in case of poor fit with a lissajous, try resorting to the 'common_mode_kids_out' method" by running IDL> nk_rta, 'scan', /mask
PAKO>set pointing xx yy
3./ best focus at the array center z_0
PAKO>offset -24.5, 3.4 /sys nasmyth PAKO>@focusOTF enter 0 as the central focus z value z_c
It will run 5 scans at focus z_c-0.8; z_c-0.4; z_c; z_c+0.4; z_c+0.8
Analyse each scan individualy using:
IDL> nk_rta, '20160303s1', /nas, /xyguess, /largemap, rmax_keep=30, radius=35, /nopng
once the 5 scans are reduced, run (for ex.):
IDL> nk_focus_liss_old, '20160303s'+strtrim([1,2,3,4,5], 2), /nas, /xyguess, rmax_keep=30, get_focus_error=1, imzoom=1
NB: if the optimal focus value is far from zero (abs(z_0) > 0.3), reiterate in ingesting the optimal focus value as the central focus z_c asked by @focusOTF
4./ best focus across the field-of-view z_{off-center}
PAKO>offset 'xoff' 'yoff' \sys nasmyth PAKO>@focusOTF enter a central focus value z_c not too far from the optimal focus z.
Analyse each scan individualy using:
IDL> nk_rta, '20160304s1', /nas, /xyguess, /largemap, rmax_keep=30, radius=35, /nopng
once the 5 scans are reduced, run (for ex.):
IDL> nk_focus_liss_old, '20160304s'+strtrim([1,2,3,4,5], 2), /nas, /xyguess, rmax_keep=30, get_focus_error=1, imzoom=1
Please keep track of the ('xoff', 'yoff') in TAPAS for easier analysis of the campaign results the list of nasmyth coordinates to be explored can be read on the A2 printed sheet.
[OPTIONAL: ] In case the focus@1mm and the focus@2mm are very discrepant, the focus exploration bin (-0.8, +0.8) may be not sufficient to fit simultaneously f_1 and f_2. Relaunch @focusOTF using the central focus z_c=<f_2>, where <f_2> is as close as possible to the focus@2mm value
5./ monitoring of the focus temporal drift
Since we are interested in the difference between f_0 and various f_{off-center}, f_0 should be regularly checked (every few points depending on its stability).
re-iterate 3/ after 4 focus z measurements at off-centered Nasmyth offsets.
List of Nasmyth offsets (version 18 points)
Info |
Nasmyth offsets |
A1 kid numdet |
first half of the main diameter |
81.2, -104.6 |
4584 |
43.8, -69.2 |
4252 |
|
25.9, -39.1 |
3941 |
|
center of the array |
-24.5, 3.4 |
3385 |
second half of the main diameter |
-53.3, 41.5 |
2827 |
-89.7, 68.1 |
2571 |
|
-118.5, 106.7 |
2166 |
|
-143.6, 125.8 |
1938 |
|
2nd diameter |
-120.2, -89.8 |
4016 |
-79.6, -55.4 |
3847 |
|
-54.0, -39.0 |
3769 |
|
25.2, 49.7 |
2979 |
|
57.9, 81.7 |
2738 |
|
82.3, 106.5 |
2512 |
|
circle |
-123.7, 3.8 |
3068 |
63.4, 14.1 |
3548 |
|
-22.3, -84.7 |
4202 |
|
-28.6, 107.4 |
2335 |
OLD List of Nasmyth offsets (version 22 points)
[DO NOT USE]
Info |
Nasmyth offsets |
A1 kid numdet |
first half of the main diameter |
92.9, -112.2 |
4591 |
79.3, -95.7 |
4494 |
|
53.3, -67.0 |
4251 |
|
25.9, -39.1 |
3941 |
|
center of the array |
-24.5, 3.4 |
3385 |
second half of the main diameter |
-53.3, 41.5 |
2827 |
-89.7, 68.1 |
2571 |
|
-104.8, 89.9 |
2344 |
|
-130.4, 113.7 |
2015 |
|
-155.3, 133.1 |
1871 |
|
other points |
38.6, 78.1 |
2740 |
-79.6, -55.4 |
3847 |
|
63.4, 14.1 |
3548 |
|
-123.7, 3.8 |
3068 |
|
-28.6, 107.4 |
2335 |
|
-22.3, -84.7 |
4202 |
|
-135.7, -104.3 |
4173 |
|
-110.9, -87.6 |
4021 |
|
-54.0, -39.0 |
3769 |
|
25.2, 49.7 |
2979 |
|
65.1, 93.8 |
2664 |
|
90.0, 118.1 |
2497 |