Differences between revisions 3 and 5 (spanning 2 versions)
⇤ ← Revision 3 as of 2006-12-15 17:19:07 →
Size: 728
Editor: mrt-aod
Comment:
← Revision 5 as of 2009-04-16 08:26:44 → ⇥
Size: 538
Editor: localhost
Comment: converted to 1.6 markup
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
There are two ways of doing absortion measurements:
 *Not moving the telescope;
  *paKo> source ABSORBER EQ2000 05:55:10.28 +07:24:25.4 LSR 0.0 FLUX 0.34 0.0 PROJECT CALIB
  *paKo> onf 20 32 -->Repeat this 4 times
 Absorber measurements for the bolometer:
 
Line 8: Line 5:
  
Line 9: Line 7:
  *paKo> bmap 240 240 4 4
  *paKo> start		   *paKo> onf 8 80
 
Line 12: Line 10:
Repeat this at the different elevations changing the coordinates! <!> Repeat this at the different elevations changing the coordinates!

Absorber measurements for the bolometer:

  • Moving the telescope; --> Find at what elevations you want to do the measurements, then find a real source in the sky at such elevations, for example let take W3OH.

    • >grep W3OH pool.sou --> W3OH EQ 2000 02:27:03.88 +61:52:25.5 LSR 0.0 FLUX 8.13 0.0 PROJECT CALIB

    • paKo> sou ABSORBER EQ 2000 02:27:03.88 +61:52:25.5 LSR 0.0 FLUX 8.13 0.0 PROJECT CALIB

    • paKo> onf 8 80

<!> Repeat this at the different elevations changing the coordinates!

How_to_do_absortion_measurements (last edited 2009-04-16 08:26:44 by localhost)