Diff for "How_to_do_absortion_measurements"

Differences between revisions 3 and 4

Absorber measurements for the bolometer:

Moving the telescope; --> Find at what elevations you want to do the measurements, then find a real source in the sky at such elevations, for example let take W3OH.
- >grep W3OH pool.sou --> W3OH EQ 2000 02:27:03.88 +61:52:25.5 LSR 0.0 FLUX 8.13 0.0 PROJECT CALIB
- paKo> sou ABSORBER EQ 2000 02:27:03.88 +61:52:25.5 LSR 0.0 FLUX 8.13 0.0 PROJECT CALIB
- paKo> onf 8 80

Repeat this at the different elevations changing the coordinates!

-  ⇤ ← Revision 3 as of 2006-12-15 17:19:07 → 
  Size: 728
  Editor: mrt-aod
  Comment:
+   ← Revision 4 as of 2007-02-16 22:01:59 → ⇥
  Size: 538
  Editor: gra-lt6
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-There are two ways of doing absortion measurements:
 *Not moving the telescope;
  *paKo> source ABSORBER EQ2000  05:55:10.28  +07:24:25.4  LSR 0.0 FLUX 0.34 0.0 PROJECT CALIB
  *paKo> onf 20 32  -->Repeat this 4 times
+Absorber measurements for the bolometer:
-Line 8:
+Line 5:
-Line 9:
+Line 7:
-  *paKo> bmap 240 240 4 4
  *paKo> start
+  *paKo> onf 8 80
-Line 12:
+Line 10:
-Repeat this at the different elevations changing the coordinates!
+<!> Repeat this at the different elevations changing the coordinates!