|
⇤ ← Revision 1 as of 2025-07-02 12:35:44
Size: 776
Comment:
|
Size: 778
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 7: | Line 7: |
| * First of all, check the focus offsets in total power after the cooldown. Over run #72 focus corrections of Ar2/1 were self-consistent and that of Ar3 was 0.3-0.4 mm displaced. On run #73, we obtained offsets in focus corrections about 0.3-0.5 mm between consecutive arrays. Depending on the results, establish appropriate compromise values. | * First of all, check the focus offsets in total power after the cooldown. Over run #72 focus corrections of Ar2/1 were self-consistent and that of Ar3 was +0.3-0.4 mm displaced. On run #73, we obtained offsets in focus corrections about +0.3-0.5 mm between consecutive arrays. Depending on the results, establish appropriate compromise values. |
Back to the NIKA2 Run 74 main page
- Check the run #74 is activated ind DAQ *.ini files/creation of imbFITS files.
Goals of NIKA2 run 74 (Recommissioning, third attempt -draft-):
- First of all, check the focus offsets in total power after the cooldown. Over run #72 focus corrections of Ar2/1 were self-consistent and that of Ar3 was +0.3-0.4 mm displaced. On run #73, we obtained offsets in focus corrections about +0.3-0.5 mm between consecutive arrays. Depending on the results, establish appropriate compromise values.
- Beam maps to produce new DAFs/kidpars with new reference KID (Ar2, central KID).
Calib_1scan maps on flux standards in total power & polarimetry.
Small maps on poit-like & extended (auxiliary) sources.