|
Size: 860
Comment:
|
← Revision 7 as of 2025-07-10 05:45:50 ⇥
Size: 849
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 5: | Line 5: |
| Goals of NIKA2 run 74 (Re-commissioning of NIKA2+, third attempt -draft-): | Goals of NIKA2 run 74 (Re-commissioning of NIKA2+, third slot -draft-): |
| Line 7: | Line 7: |
| * First of all, check the focus offsets in total power after the cooldown. Over run #72 focus corrections of Ar2/1 were self-consistent and that of Ar3 was +0.3-0.4 mm displaced. On run #73, we obtained offsets in focus corrections about +0.3-0.5 mm between consecutive arrays. Depending on the results, establish appropriate compromise values. | * First of all, check the focus offsets in total power after the cooldown. Over run #72 focus corrections of Ar2/1 were self-consistent and that of Ar3 was +0.3-0.4 mm displaced. On run #73, we obtained offsets of about +0.3 mm for Ar2/1 and +0.6 mm for Ar2/3. Depending on these tests, we would establish appropriate compromise values. |
Back to the NIKA2 Run 74 main page
- Check the run #74 is activated ind DAQ *.ini files/creation of imbFITS files.
Goals of NIKA2 run 74 (Re-commissioning of NIKA2+, third slot -draft-):
- First of all, check the focus offsets in total power after the cooldown. Over run #72 focus corrections of Ar2/1 were self-consistent and that of Ar3 was +0.3-0.4 mm displaced. On run #73, we obtained offsets of about +0.3 mm for Ar2/1 and +0.6 mm for Ar2/3. Depending on these tests, we would establish appropriate compromise values.
- Beam maps to produce new DAFs/kidpars with new reference KID (Ar2, central KID).
Calib_1scan maps on flux standards in total power & polarimetry. In the latter case, get focus correction from Ar1-Ar3 average.
Small maps on point-like & extended (auxiliary) bright sources.