|
Size: 939
Comment:
|
Size: 1422
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| The flatfields must be done '''once per pool session'''. This observations must be carried out during nights with quite stable conditions. If the conditions are not such stable the flatfield should be redone. |
== Flatfield observation == |
| Line 5: | Line 3: |
| Aim: derive parameters of the 117ch array, i.e. the sensitivity of each pixel and relative offsets of the pixels. A flatfield observation must be done '''at least once per pool session'''. This observation must be carried out during nights only under very stable weather conditions (tau of 0.5 is ok though). If the conditions are not such stable the flatfield should be redone. |
|
| Line 11: | Line 12: |
| If not suitable planets are up during the night a strong (10Jy/beam) point source must be observed (e.g. J1229+021) |
If not suitable planets are up during the night a strong (10Jy/beam) point source somewhere between 50 and 70 deg (e.g. J1229+021). The source should be point-like (e.g. Uranus and Mars, but not Saturn or Jupiter!). |
| Line 14: | Line 15: |
| * A pointing and a focus must be done before and after the map | '''IMPORTANT''': ''Old p4/p5 values can cause a drift in the array parameters, which will make the data useless.'' * A '''pointing''' and a '''focus''' must be done ''before'' and ''after'' the map |
| Line 17: | Line 20: |
| pako> source J12991+021 !Already done before | pako> source J1229+021 !Already done before |
| Line 32: | Line 35: |
| Line 34: | Line 38: |
| * Check the array-offsets for stability. | |
| Line 35: | Line 40: |
* Check the array-offsets for stability. |
How are the data checked with mopsic?? (CK) |
Flatfield observation
Aim: derive parameters of the 117ch array, i.e. the sensitivity of each pixel and relative offsets of the pixels.
A flatfield observation must be done at least once per pool session. This observation must be carried out during nights only under very stable weather conditions (tau of 0.5 is ok though). If the conditions are not such stable the flatfield should be redone.
Low tau is not so important, but stable pointing is.
In case MAMBO2 or the mirrors in front of it are readjusted, several flatfields must be done several times.
If not suitable planets are up during the night a strong (10Jy/beam) point source somewhere between 50 and 70 deg (e.g. J1229+021). The source should be point-like (e.g. Uranus and Mars, but not Saturn or Jupiter!).
IMPORTANT: Old p4/p5 values can cause a drift in the array parameters, which will make the data useless.
A pointing and a focus must be done before and after the map
- Map procedure
pako> source J1229+021 !Already done before
pako> roff53 !Central channel for maps
pako> rcpmap
pako> start
In detail, the rcpmap procedure is:
- bsw 46 bmap 360 290 5 6
The duration of this map is (290/5)*360 ~ 1hr.
- Check the array-offsets for stability.
How are the data checked with mopsic?? (CK)