|
Size: 824
Comment:
|
Size: 1240
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 10: | Line 10: |
| THE NOISE (with the window) seems OK. On three random lines over the three arrays I see on average 1Hz/sqrt(Hz) (2mm), 2Hz/sqrt(Hz) (1mm, NIKEL_RF) and 2.5Hz/sqrt(Hz) (1mm, NIKEL_DC). Very flat on the 2mm one, a bit less on the 1mm ones. Still no traces of the pulse tube. | THE NOISE (with the window) seems OK. On three random lines over the three arrays I see on average 1Hz/sqrt(Hz) (2mm), 2Hz/sqrt(Hz) (1mm, NIKEL_RF) and 2.5Hz/sqrt(Hz) (1mm, NIKEL_DC). Very flat on the 2mm one, a bit less on the 1mm ones. Still no traces of the pulse tube. I think that the difference between the noise on the NIKEL_Rf and the NIKEL_DC can be explained with the modulation. The nominal 10kHz modulation on the NIKEL_RF are in reality 6.5kHz, while on the other RF source attached to the NIKEL_DC we have 9.5kHz. Or viceversa. So the RF_dIdQ is calculated a bit differently. So my conclusion is that most probably there is no real difference between the two configurations. |
Back to the NIKA2 run 3 main page
January 2016, 13 (Wednesday)
19h30. NIKA2 HAS ALL THE 20 LINES CONNECTED AND ALL WITH RESONANCES. WE ENTERED THE 3000 PIXELS ERA.
THE NOISE (with the window) seems OK. On three random lines over the three arrays I see on average 1Hz/sqrt(Hz) (2mm), 2Hz/sqrt(Hz) (1mm, NIKEL_RF) and 2.5Hz/sqrt(Hz) (1mm, NIKEL_DC). Very flat on the 2mm one, a bit less on the 1mm ones. Still no traces of the pulse tube. I think that the difference between the noise on the NIKEL_Rf and the NIKEL_DC can be explained with the modulation. The nominal 10kHz modulation on the NIKEL_RF are in reality 6.5kHz, while on the other RF source attached to the NIKEL_DC we have 9.5kHz. Or viceversa. So the RF_dIdQ is calculated a bit differently. So my conclusion is that most probably there is no real difference between the two configurations.
January 2016, 12 (Tuesday)
- Olivier, Alessandro and Florian arrived at the telescope.
The new boards installed and connected
Array 1 (1mm - IN-OUT 5-12): NIKEL_RF (192.168.1.150)
Array 2 (2mm - IN-OUT 1-4): NIKEL_USB (192.168.1.221-24)
Array 3 (1mm - IN-OUT 13/20): NIKEL_DC (192.168.1.170)