|
Size: 400
Comment:
|
Size: 1015
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 10: | Line 10: |
| Pako> catalog source pool !!! ´´Setup the project source catalog´´ Pako> catalog source ihet !!! ´´Setup the pointing/calibration source catalog´´ |
Pako> catalog source pool ! ''Setup the project source catalog'' [[BR]] Pako> catalog source ihet ! ''Setup the pointing/calibration source catalog'' <!> Pointing sources: '''J1419+240''' not 1419+240 == Focus, pointing, Skydip == Pako> focus 1.1 Pako> start ! ''Start the focus'' (!) Do a focus when atmospheric conditions are changing, typically after sunset/sunrise Pako> p40 !''Short length pointing for weak sources+start'' Pako> p60 !''Long length pointing for strong sources+start'' (!) Before each OnOff or map if they are larger than 30 mn. Pako> bt !''Skydip at the current azimuth+start'' (!) Every 2 hours in stable atmospheric condition. <!> Before an OnOff, be sure you are pointing at the right pixel (20). |
Bolometer's Observation:
The most important commands of the old system have been adapted to the NCS. Here is a typical starting sequence for the bolometer.
Setup the Bolometer
Pako> @wbolo
Sources Catalog
Pako> catalog source pool ! Setup the project source catalog BR Pako> catalog source ihet ! Setup the pointing/calibration source catalog
Pointing sources: J1419+240 not 1419+240
Focus, pointing, Skydip
Pako> focus 1.1 Pako> start ! Start the focus 
Do a focus when atmospheric conditions are changing, typically after sunset/sunrise
Pako> p40 !Short length pointing for weak sources+start Pako> p60 !Long length pointing for strong sources+start Before each OnOff or map if they are larger than 30 mn.
Pako> bt !Skydip at the current azimuth+start Every 2 hours in stable atmospheric condition.
Before an OnOff, be sure you are pointing at the right pixel (20).