Size: 105
Comment:
|
Size: 1456
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
=== Useful recipes to observe the Pool with {{{Pako}}}, the observing interface with the telescope. === | = Bolometer's Observation: = The most important commands of the old system have been adapted to the NCS. Here is a typical starting sequence for the bolometer. == Setup the Bolometer == Pako> @wbolo !'' Mambo2, central pixel 53, short onoff (@onf4)'' == Sources Catalog == Pako> catalog source pool ! ''Setup the project source catalog'' [[BR]] Pako> catalog source ihet ! ''Setup the pointing/calibration source catalog'' <!> Pointing sources: '''J1419+240''' not 1419+240 == Focus, pointing, Skydip == Pako> focus 1.1 Pako> start ! ''Start the focus'' [[BR]] Pako> set focus _sfcz_ !''Correct the focus with _sfcz_. Correction from MOPSIC (@f or @fsn for weak sources)'' (!) Do a focus when atmospheric conditions are changing, typically after sunset/sunrise Pako> p40 !''Short length pointing for weak sources+start'' [[BR]] Pako> p60 !''Long length pointing for strong sources+start'' [[BR]] Pako> set pointing _azcor_ _elcor_ !''Correct the pointing with _azcor_ and _elcor_. Correction from MOPSIC (@p or @psn for weak source)'' (!) Before each Onoff or map if they are larger than 30 mn. Pako> bt !''Skydip at the current azimuth+start'' (!) Every 2 hours in stable atmospheric condition. <!> Before an Onoff, be sure you are pointing with the right pixel (20). == Calibration == Pako> @wbolo Pako> catalog ihet Calibrator_Name Pako> p60 Pako> SET POINTING |
Bolometer's Observation:
The most important commands of the old system have been adapted to the NCS. Here is a typical starting sequence for the bolometer.
Setup the Bolometer
Pako> @wbolo ! Mambo2, central pixel 53, short onoff (@onf4)
Sources Catalog
Pako> catalog source pool ! Setup the project source catalog BR Pako> catalog source ihet ! Setup the pointing/calibration source catalog
Pointing sources: J1419+240 not 1419+240
Focus, pointing, Skydip
Pako> focus 1.1 Pako> start ! Start the focus BR Pako> set focus _sfcz_ !Correct the focus with _sfcz_. Correction from MOPSIC (@f or @fsn for weak sources)
Do a focus when atmospheric conditions are changing, typically after sunset/sunrise
Pako> p40 !Short length pointing for weak sources+start BR Pako> p60 !Long length pointing for strong sources+start BR Pako> set pointing _azcor_ _elcor_ !Correct the pointing with _azcor_ and _elcor_. Correction from MOPSIC (@p or @psn for weak source)
Before each Onoff or map if they are larger than 30 mn.
Pako> bt !Skydip at the current azimuth+start
Every 2 hours in stable atmospheric condition.
Before an Onoff, be sure you are pointing with the right pixel (20).
Calibration
Pako> @wbolo Pako> catalog ihet Calibrator_Name Pako> p60 Pako> SET POINTING