|
Size: 1516
Comment:
|
Size: 1840
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 18: | Line 18: |
| Pako> '''focus 1.1''' | Pako> '''focus 1.1''' [[BR]] |
| Line 20: | Line 20: |
| Pako> '''set focus _sfcz_''' !''Correct the focus with _sfcz_. Correction from MOPSIC (@f or @fsn for weak sources)'' | Pako> '''set focus sfcz''' !''Correct the focus with sfcz. Correction from MOPSIC (@f or @fsn for weak sources)'' [[BR]] (!) Do a focus when atmospheric conditions are changing, typically after sunset/sunrise |
| Line 22: | Line 23: |
| (!) Do a focus when atmospheric conditions are changing, typically after sunset/sunrise | Pako> '''p40''' !''Short pointing for weak sources+start'' [[BR]] Pako> '''p60''' !''Long pointing for strong sources+start'' [[BR]] Pako> '''set pointing azcor elcor''' !''Correct the pointing with azcor and elcor. Correction from MOPSIC (@p or @psn for weak source)'' |
| Line 24: | Line 27: |
| Pako> '''p40''' !''Short length pointing for weak sources+start'' [[BR]] Pako> '''p60''' !''Long length pointing for strong sources+start'' [[BR]] Pako> '''set pointing _azcor_ _elcor_''' !''Correct the pointing with _azcor_ and _elcor_. Correction from MOPSIC (@p or @psn for weak source)'' (!) Before each Onoff or map if they are larger than 30 mn. |
(!) Before each Onoff or map if they are longer than 30 mn. |
| Line 40: | Line 39: |
| Calibration on a [primary|secondary] calibrator | |
| Line 41: | Line 41: |
| Pako> @wbolo Pako> catalog ihet Calibrator_Name Pako> p60 Pako> SET POINTING |
Pako> '''@wbolo''' [[BR]] Pako> '''catalog ihet Calibrator_Name ''' [[BR]] Pako> '''p60''' [[BR]] Pako> '''set pointing _azcor_ _elcor_''' [[BR]] Pako> '''@onf4''' ! Shor Onoff integration (4 Subscans of 10 s) <!> You may do a short @onf4 after a normal pointing to monitor the pointing sources flux. == Onoff and map == On-Off observations: |
Bolometer's Observation:
The most important commands of the old system have been adapted to the NCS. Here is a typical starting sequence for the bolometer.
Setup the Bolometer
Pako> @wbolo ! Mambo2, central pixel 53, short onoff (@onf4)
Sources Catalog
Pako> catalog source pool ! Setup the project source catalog BR Pako> catalog source ihet ! Setup the pointing/calibration source catalog
Pointing sources: J1419+240 not 1419+240
Focus, pointing, Skydip
Pako> focus 1.1 BR Pako> start ! Start the focus BR Pako> set focus sfcz !Correct the focus with sfcz. Correction from MOPSIC (@f or @fsn for weak sources) BR 
Do a focus when atmospheric conditions are changing, typically after sunset/sunrise
Pako> p40 !Short pointing for weak sources+start BR Pako> p60 !Long pointing for strong sources+start BR Pako> set pointing azcor elcor !Correct the pointing with azcor and elcor. Correction from MOPSIC (@p or @psn for weak source)
Before each Onoff or map if they are longer than 30 mn.
Pako> bt !Skydip at the current azimuth+start
Every 2 hours in stable atmospheric condition.
Before an Onoff, be sure you are pointing with the right pixel (20).
Calibration
Calibration on a [primary|secondary] calibrator
Pako> @wbolo BR Pako> catalog ihet Calibrator_Name BR Pako> p60 BR Pako> set pointing _azcor_ _elcor_ BR Pako> @onf4 ! Shor Onoff integration (4 Subscans of 10 s)
You may do a short @onf4 after a normal pointing to monitor the pointing sources flux.
Onoff and map
On-Off observations: