|
Size: 7448
Comment:
|
Size: 12531
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| ##acl NicolasBillot,hermelo,CarstenKramer,SamuelLeclerc:read,write,delete,revert,admin Default ##http://www.iram.es/IRAMES/mainWiki/Bolometers/ObservingSession |
#acl hermelo,CarstenKramer,NicolasBillot,SamuelLeclerc:read,write,delete,revert,admin Default |
| Line 10: | Line 8: |
| For example, the file [[attachment:README_078-13.txt | ~/078-13/README_078-13.txt ]] shows you how to observe the project 078-13. | For example, the file [[attachment:README_199-14.txt | ~/199-14/README_199-14.txt ]] explains you how to observe the project 199-14. |
| Line 15: | Line 13: |
| '''[[ http://www.iram.es/IRAMES/mainWiki/FrontPage | Go to the Front Page ]]''' ---- == Choose a project == First log into the [[https://pools.iram.es | Pool data base]] (ask the AoD for the login information) and click on the GISMO tab. {{attachment:PoolDatabase.png}} |
'''Go to the [[http://www.iram.es/IRAMES/mainWiki/Continuum/GISMO/Main|GISMO]] |[[http://www.iram.es/IRAMES/mainWiki/NIKA/Main|NIKA]] page.''' ---- ---- == For astronomers == === Choose a project === First log into the [[https://pools.iram.es | Pool data base]] (ask the AoD for the login information) and click on the GISMO/NIKA tab. {{attachment:PoolDatabase.png | Pool data base | width=850 }} |
| Line 27: | Line 30: |
| Only green projects can be observed. | Only green projects should be observed. |
| Line 30: | Line 33: |
| {{attachment:Visibility.png}} | {{attachment:Visibility.png | Visibility plot | width=850}} |
| Line 43: | Line 46: |
| == Starting PaKo == | === Starting PaKo === |
| Line 49: | Line 52: |
| ssh -X gismos-13@mrt-lx1.iram.es (ask the AoD for the password) | $ ssh -X pool_account@mrt-lx1.iram.es (ask the AoD for the name of the pool account and the password) |
| Line 55: | Line 58: |
| gopako pakodisplay pakoGISMO |
$ gopako $ pakodisplay $ pakoGISMO2014 or pakoNIKA |
| Line 64: | Line 67: |
| == Project setup == The standard method to set the project information is through a !PaKo script (see for example [[attachment:setup_078-13.pako | setup_078-13.pako ]]). It is IMPORTANT to set the project accordingly before each observation in order to identify the scans observed for each project, keep control on the time used to observe each project, and write the data files in the right directory. For example, before to start to observe the project 078-13 you must type: {{{ PAKO> @ ~/078-13/setup_078-13.pako }}} When you will be doing tests, or if you have to stop by wind, or whatever, just tape "set project test". That way, no project will loose time due to technical problems, or bad weather. ---- == Catalog of sources == Before to start to observe a certain project it is necessary to load its catalog of sources. For example, for project 078-13: {{{ PAKO> SOURCE CATALOG ~/078-13/catalog_078-13.sou }}} This command will load the following list of sources: {{{ NGC4449 EQ 2000 12:28:09.408 +44:05:32.20 LSR 0.0 NGC4449-S EQ 2000 12:28:10.958 +44:05:26.30 LSR 0.0 NGC4449-N EQ 2000 12:28:12.966 +44:07:04.57 LSR 0.0 NGC4449-E EQ 2000 12:28:17.019 +44:06:30.04 LSR 0.0 }}} To select any of these sources just type: {{{ PAKO> source NGC4449-N }}} ---- == Telescope setup == Check in the PaKo display for the current pointing values (AZcurrent and and ELcurrent) and write them down. Choose a nearby quasar as pointing and focus source (using e.g. XEphem): {{{ PAKO> source 0133+476 /cat * }}} Launch the '''[[attachment:cont_pointing.pako | cont_pointing ]]''' script: {{{ PAKO> @ cont_pointing }}} For NIKA, check with the AoD the pointing corrections. For GISMO, check in the Nexus logsheet for the corrections in azimuth and elevation (columns pnt.dAZ and pnt.dEL), and calculate the new pointing values as: {{{ AZnew = AZcurrent + pnt.dAZ ELnew = ELcurrent + pnt.dEL }}} If the new pointing corrections are within 10" of the previous values, the array with its large field-of-view will still be well centered. To update the pointing constants used by PaKo, type: {{{ PAKO> set pointing AZnew ELnew }}} Check the focus using the '''[[attachment:cont_focus.pako | cont_focus ]]''' script: {{{ PAKO> @ cont_focus Fcurrent }}} where Fcurrent is the current value of the focus. For NIKA, check with the AoD the focus correction. For GISMO, to calculate the new value of the focus, open another terminal and use the python script ~/Focus/Focus.py : {{{ cd Focus/ python Focus.py }}} The python script will ask for the 1st scan of the focus sequence and the total number of scans (i.e., 5). Check if the two estimations shown (see image below) in the plot are consistent and set the new focus value: {{{ PAKO> set focus Fnew }}} '''IMPORTANT:''' The focus needs to be monitored every two hours or so, and it needs to be corrected online! {{attachment:Focus.png}} |
=== Starting XEphem === Log into the mrt-lx3 machine: {{{ $ ssh -X pool_account@mrt-lx3.iram.es }}} Type: {{{ $ useNCS $ azElToXephem.py & $ xephem & }}} Click on the tab "View" and open the "Sky View". The "cross hair" shows the coordinates the telescope is pointing at. The filled blue circles are the pointing sources. The size of the circle is proportional to the flux of the target. Click on the tab "Data" and go to "Files". In the new window go again to "Files" and load the catalog of the project that you are observing. {{ attachment:XEphem.png | XEphem example | width=850 }} ---- === Project setup === The standard method to set the project is: {{{ PAKO> set project XXX-YY }}} However, for pooled observations this is often done using a setup script (see for example [[attachment:setup_199-14.txt | setup_199-14.pako ]]). For example, before to start to observe the project 199-14 you should type: {{{ PAKO> @ ~/199-14/setup_199-14.pako }}} It is IMPORTANT to set the project accordingly before each observation in order to identify the scans observed for each project, keep control on the time used to observe each project, and write the data files in the right directory. When you will be doing tests, or if you have to stop by wind, or whatever, just type "set project test". That way, no project will loose time due to technical problems, or bad weather. ---- === Job queue of observations === Log into the mrt-lx1 computer using the pool account: {{{ $ ssh -X pool_account@mrt-lx1.iram.es }}} Type {{{ $ observationQueue }}} This will open a file browser with a list of all jobs. The display is automatically refreshed. Right-click to delete a job. ## Check the [[https://mrt-lx1.iram.es/mainWiki/NcsUG | NCS user guide wiki]] for more obs* commands. ---- === Catalog of sources === Before to start to observe a certain project it is necessary to load its catalog of sources. Usually, this is automatically done within the setup script. If for some reason you need to load the catalog manually, type: {{{ PAKO> SOURCE CATALOG 199-14.sou }}} This command will load the catalog [[attachment:199-14.txt | 199-14.sou ]] with the position of NGC4449: To select this source, just type: {{{ PAKO> source NGC4449 }}} To select a source from the IRAM catalog of pointing sources, just type: {{{ PAKO> source pointing_source /cat iram-J2000.sou }}} ---- === Pointing === Choose a nearby quasar as pointing and focus source (using e.g. XEphem): {{{ PAKO> source 0133+476 /cat iram-J2000.sou }}} Launch the '''cont_pointing''' script: {{{ PAKO> @ cont_pointing }}} This script will launch a 1'x1' Lissajous map that takes 2 minutes. Once the pointing is finisihed, enter the pointings corrections: * For '''GISMO''', check in the PaKo display for the current pointing values (AZo and and ELo) and check in the [[ https://herapool.iram.es/GISMO/gismo.log.html | Nexus logsheet ]] for the corrections in azimuth and elevation (columns pnt.dAZ and pnt.dEL). To update the pointing constants type: {{{ PAKO> set pointing AZo+pnt.dAZ ELo+pnt.dEL }}} * For '''NIKA''' see the [[http://www.iram.es/IRAMES/mainWiki/Continuum/NIKA/DataReduction | data reduction wiki ]] and ask the AoD. ---- === Focus === The focus needs to be monitored and it needs to be corrected online! This should be done every three hours or so in the Z direction and every 12 hours in the X and Y directions. To check the quality of the focus, type: {{{ PAKO> @ cont_focusX Fx | PAKO> @ cont_focusY Fy | PAKO> @ cont_focusZ Fz }}} where Fx, Fy, and Fz are the current values of the focus in the X, Y, and Z direction, respectively. This script will send 5 1'x1' Lissajous maps performed with 5 different values of the focus. Each map will take 1 minute. Once the 5 scans are finished, follow these instructions to calculate the optimal value of the focus: * For '''GISMO''' open another terminal and use the corresponding python script: {{{ $ ssh -X mrt-lx3 $ cd Focus/ $ python FocusX.py s1 s2 s3 ... sn | $ python FocusY.py s1 s2 s3 ... sn | $ python FocusZ.py s1 s2 s3 ... sn }}} where s1 s2 s3 ... sn are the scans that the python script will use to estimate the new value of the focus. Check if the two estimates shown (see image below) in the plot are consistent. {{attachment:Focus.png|GISMO focus script|width=850}} * For '''NIKA''' see the [[http://www.iram.es/IRAMES/mainWiki/Continuum/NIKA/DataReduction | data reduction wiki ]] and ask the AoD. Finally, enter the new value: {{{ PAKO> set focus Fnew /dir X | PAKO> set focus Fnew /dir Y | PAKO> set focus Fnew /dir Z }}} |
| Line 160: | Line 231: |
| == Science targets == | === Science targets === |
| Line 163: | Line 235: |
| For example, for a 6'x12' on-the-fly map rotated 25 degrees (measured North through West) type: {{{ PAKO> @ cont_onthefly 16 12 25 |
For example, for a 16'x12' on-the-fly map, with a position angle of 25 degrees, a tilt angle of 0 degrees (both measured '''anticlockwise'''), in equatorial coordinates (radec), just type: {{{ PAKO> @ cont_onthefly 16 12 25 0 radec |
| Line 173: | Line 244: |
| PAKO> @ cont_lissajous 3 | PAKO> @ cont_lissajous 3 |
| Line 177: | Line 248: |
| For sequences of scans it is strongly recommended to use scripts. For example, the script [[attachment:observe_NGC4449.pako | observe_NGC4449.pako]] consists on a long sequence of 10'x10' on-the-fly maps covering completely the galaxy NGC4449 and 3'x3' lissajous maps focused on the main star forming regions NGC4449-N, NGC4449-S, and NGC4449-E. |
A sequence of several scans can be loaded using scripts. For example, the script [[attachment:observe_NGC4449.txt | observe_NGC4449.pako]] combines several 14'x14' on-the-fly maps at different angles in the horizontal coordinate system (azel). |
| Line 182: | Line 253: |
| PAKO> @~/078-13/observe_NGC4449 }}} ---- == Beam map == The beam map consists in a 5'x5' map with ~3" steps between rows and it takes ~18 min. Beam maps are designed to ensure the source is moved over the entire detector. The aim is to calculate the actual pixel offsets in the focal plane (see figure below). To obtain a beam map go to a primary calibrator and launch the '''[[attachment:cont_beammap.pako | cont_beammap.pako ]]''' script: {{{ PAKO> @ cont_beammap }}} {{attachment:Beammap.png}} |
PAKO> @~/193-13/observe_NGC4449 }}} ---- === GRBs === For GRB observations, the reaction time is essential. In case of "GRB alarm", please clean immediately all the jobs in the queue and run the script for GRB observations: {{{ PAKO> @ observe_GRB RAhh RAmm RAss DECdd DECmm DECss }}} The operator will give you the coordinates. For example: {{{ PAKO> @ observe_GRB 23 58 09.1 +83 49 58.2 }}} This command sends an integration of about 30 minutes directly on the GRB. Pointing will be done afterwards. To choose the pointing source use the catalog that was automatically generated by the script (see GRB.edb in the XEphem list of catalogs). Repeat the script until reaching the allocated time. Check the pointing every hour or so. ---- ---- == For technical staff == === Beam map === The beam map consists in a 5'x5' map with ~3" steps between rows and a duration ~18 min for GISMO, and 6.7'x3.7' map with 4" steps between rows and a duration ~12 min for NIKA. Beam maps are designed to ensure the source is moved over all the detectors of the array, in order to characterize and calibrate them (field of view geometry, flat field, stability...). The aim is to calculate the actual pixel offsets in the focal plane (see figure below). To obtain a beam map go to a primary calibrator and launch the '''cont_beammap.pako''' script: ## script for GISMO, and '''otfgeom.pako''' script for NIKA {{{ PAKO> @ cont_beammap }}} {{ attachment:Beammap.png | Beammap | width=600 }} ---- === Skydips === To run a skydip with the IRAM continuum cameras, launch the '''cont_skydip''' script: {{{ PAKO> @ cont_skydip }}} Please note that when using GISMO, before running a skydip, the observer has to de-activate the automatic relocking of the detectors: {{{ NEXUS -> Configuration -> Advanced -> De-activate automatic relock of detectors }}} And once the skydip is finished, the observer needs to switch-on by-hand the automatic relocking of the detectors: {{{ NEXUS -> Configuration -> Advanced -> Activate automatic relock of detectors }}} ---- === Obsolete scripts === A set of fully tested scripts from previous runs are available within the '''~/PaKo/obs/''' folder. The following list shows how to launch some of the most ''popular'' obsolete scripts: {{{ GISMO PAKO> @ obs/gismo_pointing.pako PAKO> @ obs/gismo_lissajous_2mx2m.pako PAKO> @ obs/gismo_lissajous_3mx3m.pako PAKO> @ obs/gismo_lissajous_4mx4m_2min.pako PAKO> @ obs/gismo_lissajous_4mx4m.pako PAKO> @ obs/gismo_lissajous_5mx5mfast.pako PAKO> @ obs/gismo_lissajous_5mx5m.pako PAKO> @ obs/gismo_lissajous_GDF.pako PAKO> @ obs/gismo_lissajous_tiny1min.pako PAKO> @ obs/gismo_lissajous_tiny2min.pako PAKO> @ obs/gismo_lissajous_tiny4min.pako PAKO> @ obs/gismo_lissajous_tiny5min.pako PAKO> @ obs/gismo_lissajous_tiny10min.pako PAKO> @ obs/gismo_otf_6mx6m.pako PAKO> @ obs/gismo_otf_8mx8m.pako PAKO> @ obs/gismo_otf_10mx10m.pako PAKO> @ obs/gismo_otf_30mx30m.pako PAKO> @ obs/gismo_otf_beammap.pako NIKA PAKO> @ obs/cross.pako PAKO> @ obs/diydown.pako PAKO> @ obs/diyup.pako PAKO> @ obs/faintliss1.pako PAKO> @ obs/faintliss1t.pako PAKO> @ obs/faintliss2.pako PAKO> @ obs/faintlissfast.pako PAKO> @ obs/faintliss.pako PAKO> @ obs/faintlisst.pako PAKO> @ obs/focusliss.pako PAKO> @ obs/focusp2.pako PAKO> @ obs/focusp.pako PAKO> @ obs/ngc891liss.pako PAKO> @ obs/otf10x10.pako PAKO> @ obs/otf10x2.pako PAKO> @ obs/otf15x10.pako PAKO> @ obs/otf3x3_el.pako PAKO> @ obs/otf3x3.pako PAKO> @ obs/otf4x2.pako PAKO> @ obs/otf4x4.pako PAKO> @ obs/otf5x5_half.pako PAKO> @ obs/otf5x5.pako PAKO> @ obs/otf5x5_pol.pako PAKO> @ obs/otf5x5slow.pako PAKO> @ obs/otfgeom.pako PAKO> @ obs/otfgeom_pol.pako PAKO> @ obs/otf.pako PAKO> @ obs/otfsz.pako PAKO> @ obs/pointliss.pako PAKO> @ obs/pointliss_pol.pako PAKO> @ obs/skydip.pako PAKO> @ obs/skydip_test.pako PAKO> @ obs/skydip_updown.pako PAKO> @ obs/skydip_up.pako }}} |
| Line 200: | Line 393: |
== Skydips == To run a skydip with the IRAM continuum cameras, launch the '''[[attachment:gismo_skydip.pako | cont_skydip ]]''' script: ): {{{ PAKO> @ cont_skydip }}} Please note that when using GISMO, before running a skydip, the observer has to de-activate the automatic relocking of the detectors: {{{ NEXUS -> Configuration -> Advanced -> De-activate automatic relock of detectors }}} And once the skydip is finished, the observer then needs to switch-on by-hand the automatic relocking of the detectors: {{{ NEXUS -> Configuration -> Advanced -> Activate automatic relock of detectors }}} ----- Author: Israel Hermelo (IRAM 30m continuum pool manager) |
---- Author: Israel Hermelo ([[http://www.iram.es/IRAMES/mainWiki/Continuum/GISMO/Main|GISMO]] &[[http://www.iram.es/IRAMES/mainWiki/NIKA/Main|NIKA]] Pool Manager) |
| Line 229: | Line 399: |
| Created: 2013.10.25 Last update: 2014.01.14 |
Created: 2013.OCT.25 Last update: 2014.OCT.16 |
Observing session
Observations are carried from a dedicated pool account (ask the AoD for the login information). Each project has a folder within the home directory of the pool account with instructions on how to proceed. Read carefully the README file before to start. For example, the file ~/199-14/README_199-14.txt explains you how to observe the project 199-14.
Contents
For astronomers
Choose a project
First log into the Pool data base (ask the AoD for the login information) and click on the GISMO/NIKA tab.
Projects have different priorities from 6 (highest priority) to 1 (lowest priority). Green color indicates that the project is scheduled, orange that the project is on hold, and red that the project is finished. Only green projects should be observed. To check the visibility of these projects go to the visibility tab:
The red vertical line corresponds to the current time (UT). In this example there are four priority 5 projects. Project 077-13 is not visible at the current time. Project 079-13 is close to the low elevation limit so it is a bad option. Since project 103-13 sets first, you should first observe this project. After 2-3 hours change to project 100-13. In case that none of the priority 5 projects have weather requirements (see the README files) compatible with the current conditions, go for priority 4 projects and so on.
Starting PaKo
To run the observations at 30m telescope it is necessary to start a PaKo session. First log into the mrt-lx1 machine:
$ ssh -X pool_account@mrt-lx1.iram.es (ask the AoD for the name of the pool account and the password)
Then start PaKo:
$ gopako $ pakodisplay $ pakoGISMO2014 or pakoNIKA
With these commands, PaKo will be running in the '~/PaKo/' folder.
Starting XEphem
Log into the mrt-lx3 machine:
$ ssh -X pool_account@mrt-lx3.iram.es
Type:
$ useNCS $ azElToXephem.py & $ xephem &
Click on the tab "View" and open the "Sky View". The "cross hair" shows the coordinates the telescope is pointing at. The filled blue circles are the pointing sources. The size of the circle is proportional to the flux of the target. Click on the tab "Data" and go to "Files". In the new window go again to "Files" and load the catalog of the project that you are observing.
Project setup
The standard method to set the project is:
PAKO> set project XXX-YY
However, for pooled observations this is often done using a setup script (see for example setup_199-14.pako). For example, before to start to observe the project 199-14 you should type:
PAKO> @ ~/199-14/setup_199-14.pako
It is IMPORTANT to set the project accordingly before each observation in order to identify the scans observed for each project, keep control on the time used to observe each project, and write the data files in the right directory. When you will be doing tests, or if you have to stop by wind, or whatever, just type "set project test". That way, no project will loose time due to technical problems, or bad weather.
Job queue of observations
Log into the mrt-lx1 computer using the pool account:
$ ssh -X pool_account@mrt-lx1.iram.es
Type
$ observationQueue
This will open a file browser with a list of all jobs. The display is automatically refreshed. Right-click to delete a job.
Catalog of sources
Before to start to observe a certain project it is necessary to load its catalog of sources. Usually, this is automatically done within the setup script. If for some reason you need to load the catalog manually, type:
PAKO> SOURCE CATALOG 199-14.sou
This command will load the catalog 199-14.sou with the position of NGC4449: To select this source, just type:
PAKO> source NGC4449
To select a source from the IRAM catalog of pointing sources, just type:
PAKO> source pointing_source /cat iram-J2000.sou
Pointing
Choose a nearby quasar as pointing and focus source (using e.g. XEphem):
PAKO> source 0133+476 /cat iram-J2000.sou
Launch the cont_pointing script:
PAKO> @ cont_pointing
This script will launch a 1'x1' Lissajous map that takes 2 minutes. Once the pointing is finisihed, enter the pointings corrections:
For GISMO, check in the PaKo display for the current pointing values (AZo and and ELo) and check in the Nexus logsheet for the corrections in azimuth and elevation (columns pnt.dAZ and pnt.dEL). To update the pointing constants type:
PAKO> set pointing AZo+pnt.dAZ ELo+pnt.dEL
For NIKA see the data reduction wiki and ask the AoD.
Focus
The focus needs to be monitored and it needs to be corrected online! This should be done every three hours or so in the Z direction and every 12 hours in the X and Y directions. To check the quality of the focus, type:
PAKO> @ cont_focusX Fx | PAKO> @ cont_focusY Fy | PAKO> @ cont_focusZ Fz
where Fx, Fy, and Fz are the current values of the focus in the X, Y, and Z direction, respectively.
This script will send 5 1'x1' Lissajous maps performed with 5 different values of the focus. Each map will take 1 minute. Once the 5 scans are finished, follow these instructions to calculate the optimal value of the focus:
For GISMO open another terminal and use the corresponding python script:
$ ssh -X mrt-lx3 $ cd Focus/ $ python FocusX.py s1 s2 s3 ... sn | $ python FocusY.py s1 s2 s3 ... sn | $ python FocusZ.py s1 s2 s3 ... sn
where s1 s2 s3 ... sn are the scans that the python script will use to estimate the new value of the focus. Check if the two estimates shown (see image below) in the plot are consistent.
For NIKA see the data reduction wiki and ask the AoD.
Finally, enter the new value:
PAKO> set focus Fnew /dir X | PAKO> set focus Fnew /dir Y | PAKO> set focus Fnew /dir Z
Now the telescope is pointed and focussed, and ready to start to observe.
Science targets
Observations of science targets are performed via on-the-fly and/or Lissajous maps. For example, for a 16'x12' on-the-fly map, with a position angle of 25 degrees, a tilt angle of 0 degrees (both measured anticlockwise), in equatorial coordinates (radec), just type:
PAKO> @ cont_onthefly 16 12 25 0 radec
For a 3'x3' Lissajous type:
PAKO> @ cont_lissajous 3
A sequence of several scans can be loaded using scripts. For example, the script observe_NGC4449.pako combines several 14'x14' on-the-fly maps at different angles in the horizontal coordinate system (azel). To launch this script just type:
PAKO> @~/193-13/observe_NGC4449
GRBs
For GRB observations, the reaction time is essential. In case of "GRB alarm", please clean immediately all the jobs in the queue and run the script for GRB observations:
PAKO> @ observe_GRB RAhh RAmm RAss DECdd DECmm DECss
The operator will give you the coordinates. For example:
PAKO> @ observe_GRB 23 58 09.1 +83 49 58.2
This command sends an integration of about 30 minutes directly on the GRB. Pointing will be done afterwards. To choose the pointing source use the catalog that was automatically generated by the script (see GRB.edb in the XEphem list of catalogs).
Repeat the script until reaching the allocated time. Check the pointing every hour or so.
For technical staff
Beam map
The beam map consists in a 5'x5' map with ~3" steps between rows and a duration ~18 min for GISMO, and 6.7'x3.7' map with 4" steps between rows and a duration ~12 min for NIKA. Beam maps are designed to ensure the source is moved over all the detectors of the array, in order to characterize and calibrate them (field of view geometry, flat field, stability...). The aim is to calculate the actual pixel offsets in the focal plane (see figure below). To obtain a beam map go to a primary calibrator and launch the cont_beammap.pako script:
PAKO> @ cont_beammap
Skydips
To run a skydip with the IRAM continuum cameras, launch the cont_skydip script:
PAKO> @ cont_skydip
Please note that when using GISMO, before running a skydip, the observer has to de-activate the automatic relocking of the detectors:
NEXUS -> Configuration -> Advanced -> De-activate automatic relock of detectors
And once the skydip is finished, the observer needs to switch-on by-hand the automatic relocking of the detectors:
NEXUS -> Configuration -> Advanced -> Activate automatic relock of detectors
Obsolete scripts
A set of fully tested scripts from previous runs are available within the ~/PaKo/obs/ folder. The following list shows how to launch some of the most popular obsolete scripts:
GISMO
PAKO> @ obs/gismo_pointing.pako
PAKO> @ obs/gismo_lissajous_2mx2m.pako
PAKO> @ obs/gismo_lissajous_3mx3m.pako
PAKO> @ obs/gismo_lissajous_4mx4m_2min.pako
PAKO> @ obs/gismo_lissajous_4mx4m.pako
PAKO> @ obs/gismo_lissajous_5mx5mfast.pako
PAKO> @ obs/gismo_lissajous_5mx5m.pako
PAKO> @ obs/gismo_lissajous_GDF.pako
PAKO> @ obs/gismo_lissajous_tiny1min.pako
PAKO> @ obs/gismo_lissajous_tiny2min.pako
PAKO> @ obs/gismo_lissajous_tiny4min.pako
PAKO> @ obs/gismo_lissajous_tiny5min.pako
PAKO> @ obs/gismo_lissajous_tiny10min.pako
PAKO> @ obs/gismo_otf_6mx6m.pako
PAKO> @ obs/gismo_otf_8mx8m.pako
PAKO> @ obs/gismo_otf_10mx10m.pako
PAKO> @ obs/gismo_otf_30mx30m.pako
PAKO> @ obs/gismo_otf_beammap.pako
NIKA
PAKO> @ obs/cross.pako
PAKO> @ obs/diydown.pako
PAKO> @ obs/diyup.pako
PAKO> @ obs/faintliss1.pako
PAKO> @ obs/faintliss1t.pako
PAKO> @ obs/faintliss2.pako
PAKO> @ obs/faintlissfast.pako
PAKO> @ obs/faintliss.pako
PAKO> @ obs/faintlisst.pako
PAKO> @ obs/focusliss.pako
PAKO> @ obs/focusp2.pako
PAKO> @ obs/focusp.pako
PAKO> @ obs/ngc891liss.pako
PAKO> @ obs/otf10x10.pako
PAKO> @ obs/otf10x2.pako
PAKO> @ obs/otf15x10.pako
PAKO> @ obs/otf3x3_el.pako
PAKO> @ obs/otf3x3.pako
PAKO> @ obs/otf4x2.pako
PAKO> @ obs/otf4x4.pako
PAKO> @ obs/otf5x5_half.pako
PAKO> @ obs/otf5x5.pako
PAKO> @ obs/otf5x5_pol.pako
PAKO> @ obs/otf5x5slow.pako
PAKO> @ obs/otfgeom.pako
PAKO> @ obs/otfgeom_pol.pako
PAKO> @ obs/otf.pako
PAKO> @ obs/otfsz.pako
PAKO> @ obs/pointliss.pako
PAKO> @ obs/pointliss_pol.pako
PAKO> @ obs/skydip.pako
PAKO> @ obs/skydip_test.pako
PAKO> @ obs/skydip_updown.pako
PAKO> @ obs/skydip_up.pako
Author: Israel Hermelo (GISMO &NIKA Pool Manager)
email: hermelo@iram.es
Created: 2013.OCT.25
Last update: 2014.OCT.16