Absorber tests are done on Mambo 1 and Mambo2 to measure the bolometer noise and possible anomouls noise (acceleration,reheating, ...)

TableOfContents

How to proceed

Ideally the measurements should be done with the moving telescope to be as cloas as possible in the observation condition. 

   > Pick-up a source around 50-65 degrees in elevation (see XEphem)
   pako> source G34.3 /grep /cat ihet
   >>> G34.3           EQ 2000  18:53:18.56  +01:14:58.2  LSR 0.0  FLUX 19.90 0.0 PROJECT CALIB
   pako> source ABSORBER EQ 2000  18:53:18.56  +01:14:58.2  LSR 0.0  FLUX 19.90 0.0 PROJECT CALIB
   pako> onf 8 80

List of absorbers measurements

PoolW0607

The precise date:hours of the He-recycling of the bolometer is not always available.

Day Scan Numbers He-Recycling Comments
08.12.2006 92,93,94,95,96,97
15.12.2006 150, 152
16.12.2006 55, 56. 99,101,102
17.12.2006 85, 86, 131, 132
18.12.2006 117, 118, 119, 168, 169
22.12.2006 38, 39
31.01.2007 2, 4, 5, 6, 7 30.01.2007:12:00AM-31.01.2007:12:45AM
01.02.2007 82, 83, 84, 85, 146, 147, 149. 150, 151, 152, 153 01.02.2007:16:00PM
03.02.2007 7, 8, 9 , 10 02.02.2007:18:30PM-03.02.2007:18:30PM
04.02.2007 72, 73, 74, 75, 111, 112, 113, 114
05.02.2007 43, 44, 46, 47, 85, 86, 87, 139, 140, 141, 145
06.02.2007 1, 2, 46, 77, 78 06.02.2007:12:00AM
07.02.2007 93
10.02.2007 75, 76
12.02.2007 158
13.02.2007 1 13.02.2007:12:00AM
14.02.2007 6,7, 27 , 28, 29
15.02.2007 42, 43, 44, 103, 104, 105, 106 15.02.2007:12:00AM 103:Gunn connected
18.02.2007 73, 74, 198, 199 17.02.2007:12:00AM
19.02.2007 90, 91, 92 19.02.2007:11:30AM
24.05.2007 207,208,...,219 24.05.2007:10:00AM