Differences between revisions 5 and 9 (spanning 4 versions)
⇤ ← Revision 5 as of 2009-09-04 11:33:44 →
Size: 853
Editor: visitor15
Comment:
← Revision 9 as of 2009-09-25 15:18:16 → ⇥
Size: 929
Editor: gra-lx17
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
=== How to proceed === === MAMBO observations on Absorber: How to proceed ===
Line 17: Line 17:
}}}
Line 18: Line 19:
for acceleration tests:
pako> accTest
}}}		 <!> Note that the ABSORBER test must be done with a wind speed lower than ~14 m/s.

MAMBO observations on Absorber: How to proceed

Ideally the measurements should be done with the moving telescope to be as close as possible in the observation condition, i.e. to have also the same synchronization signals as during real on-sky observations.

The absorber should lie on the ABBA rack and it has to be moved into the entrance window by hand. 

   > Pick-up a source  at the requested  elevation (see XEphem)
   pako> source G34.3 /grep /cat ihet
   >>> G34.3           EQ 2000  18:53:18.56  +01:14:58.2  LSR 0.0  FLUX 19.90 0.0 PROJECT CALIB
   pako> source ABSORBER EQ 2000  18:53:18.56  +01:14:58.2  LSR 0.0  FLUX 19.90 0.0 PROJECT CALIB
   > After this, test the different observing modes with different parameters:
   pako> onf 8 80
   pako> onf 20 40
   pako> bmap 360 360 5 6
   pako> ...

<!> Note that the ABSORBER test must be done with a wind speed lower than ~14 m/s.

AbsorberObs (last edited 2010-12-09 14:08:26 by mrt-lx17)