Differences between revisions 3 and 5 (spanning 2 versions)
⇤ ← Revision 3 as of 2009-07-08 17:42:56 →
Size: 679
Editor: visitor4
Comment:
← Revision 5 as of 2009-09-04 11:33:44 → ⇥
Size: 853
Editor: visitor15
Comment:
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
'''How to move the absorber in front of MAMBO ? By hand ? (ck)''' The absorber should lie on the ABBA rack and it has to be moved into the entrance window by hand.
Line 12: Line 12:
   > After this, test the different observing modes with different parameters:
Line 13: Line 14:
   pako> onf 20 40
   pako> bmap 360 360 5 6
   pako> ...

How to proceed

Ideally the measurements should be done with the moving telescope to be as close as possible in the observation condition, i.e. to have also the same synchronization signals as during real on-sky observations.

The absorber should lie on the ABBA rack and it has to be moved into the entrance window by hand. 

   > Pick-up a source  at the requested  elevation (see XEphem)
   pako> source G34.3 /grep /cat ihet
   >>> G34.3           EQ 2000  18:53:18.56  +01:14:58.2  LSR 0.0  FLUX 19.90 0.0 PROJECT CALIB
   pako> source ABSORBER EQ 2000  18:53:18.56  +01:14:58.2  LSR 0.0  FLUX 19.90 0.0 PROJECT CALIB
   > After this, test the different observing modes with different parameters:
   pako> onf 8 80
   pako> onf 20 40
   pako> bmap 360 360 5 6
   pako> ...

for acceleration tests:
pako> accTest

AbsorberObs (last edited 2010-12-09 14:08:26 by mrt-lx17)