!*********************************************************
! $Id backends-xxx_xx.pako, v0.3, 2007.11.27, SL Exp $
!
! 
!*********************************************************
! 
! Purpose: Example file to setup backends with paKo
!
! Usage:  Choose combination you want and delete or comment out the rest 
!
! Parameters:  receiver_name: name of the receiver
!              receiver_name1 receiver_name2: name of receivers if 2 receivers
!                                             are possible
!              f_shift:       frequency shift with respect to the centre IF, 
!                             default is 0
!              f_shift1 f_shift2: frequency shift if 2 shifts are possible
! 
!!!!!!!!!!!!!!!!!!!!!!!!!!!
! 1 MHZ FILTERBANK
!
! FORMAT: BACKEND 1MHz part bandwidth[mhz] frequency-shift[khz] /receiver receiver_name
!
! The frequency shift will be rounded to the next 32 MHz
! 
BACKEND 1mhz 1 256 f_shift /RECEIVER receiver_name
BACKEND 1mhz 2 256 f_shift /RECEIVER receiver_name
BACKEND 1mhz 3 256 f_shift /RECEIVER receiver_name
BACKEND 1mhz 4 256 f_shift /RECEIVER receiver_name


!
BACKEND 1mhz 1 512 f_shift /RECEIVER receiver_name
BACKEND 1mhz 2 512 f_shift /RECEIVER receiver_name
!
BACKEND 1mhz 1 768 f_shift /RECEIVER receiver_name ! needs  receiver to be in wide mode,
                                           ! i.e. with /wide option
                                           ! see setup-xxx_xx.pro
                                           ! (not possible for A100 or B100)
BACKEND 1mhz 1 1024 /RECEIVER receiver_name  ! needs to be receiver in wide mode,
                                     ! i.e. with /wide option
                                     ! (not possible for A100 or B100)

!!!!!!!!!!!!!!!!!!!!!!!!!!!
! 4 MHZ FILTERBANK
! 
! 4MHz cannot be used with A100 or B100
! 4MHz cannot be used in parallel with Autocorrelator or 100Khz on 
!    same receiver
!
BACKEND 4MHz 1 /RECEIVER receiver_name    ! receiver needs to be in wide mode
BACKEND 4MHz 2 /RECEIVER receiver_name    ! receiver needs to be in wide mode
!

!!!!!!!!!!!!!!!!!!!!!!!!!!!
! VESPA
!
! FORMAT: 
! vespa part resolution[mhz] bandwidth[Mhz] frequency-shift[Mhz] /RECEIVER name
!
! For possible combinations of bandwidth and resolution look in vespa-manual 
! 
! Maximum number of parts: 8
!
!  Example: 8 parts, resolution 320 kHz, bandwith 80 MHz, frequency-shift 0.
!           Please change the values for resolution, bandwidth and 
!              frequency-shift if you want different ones.
!           Comment out part of the autocorrelator if you want fewer than 8.
!           Part numbers in each line must be consecutive from 1 to total
!              number of parts
!  For usual observations, the rx should be setup in narrow mode.
! 
! 
BACKEND vespa 1 0.32 80 0 /RECEIVER receiver_name
BACKEND vespa 2 0.32 80 0 /RECEIVER receiver_name
BACKEND vespa 3 0.32 80 0 /RECEIVER receiver_name
BACKEND vespa 4 0.32 80 0 /RECEIVER receiver_name
BACKEND vespa 5 0.32 80 0 /RECEIVER receiver_name
BACKEND vespa 6 0.32 80 0 /RECEIVER receiver_name
BACKEND vespa 7 0.32 80 0 /RECEIVER receiver_name
BACKEND vespa 8 0.32 80 0 /RECEIVER receiver_name