Describe NK2015_Oct22 here. NIKA October 21rd, 2015 / S8 [[D2DLogNika2Run1 |Back to list of day to day logbook of observations]] == 2015-10-22 == ---- ==== Following not updated ==== TAPAS is working properly! ---- Data Repository: /home/nika2/NIKA/Data/run13_X/scan24_X ||'''Scan'''||'''UT'''||'''Source'''||'''Command''' ||'''Az'''||'''El'''||'''Pointing X, Y, Focus'''||'''Tau225'''|| '''Comment''' || || 98 || 8h50 || Mars || track || 164 || 58 || 0 0 0 || 0.26 || || || 99 || 8h52 || Mars || nkpoint b || 164 || 58 || 0 0 0 || 0.26 || set pointing -4.1 0.6 || || 100 || 8h55 || Mars || nkpoint b || 164 || 58 || -4.1 0.6 0 || 0.26 || set pointing -4.7 0.5 || || 101 || 9h02 || Mars || nkpoint b || 164 || 58 || -4.7 0.5 0 || 0.26 || set pointing -4.1 0.9 || || 102 || 9h06 || Mars || focusliss z || 164 || 58 || -4.1 0.9 0 || 0.28 || set focus -0.31 || || 103 || 9h16 || Mars || focustrack z || 164 || 58 || -4.1 0.9 -0.31 || 0.28 || set focus 0.33 || || 104 || 9h21 || Mars || focustrack z || 164 || 58 || -4.1 0.9 0.33 || 0.28 || output of focus 0.32. We keep 0.33. We have a better reproducibility with focustrack. We are more confident to use these values. || || 105 || 9h27 || Mars || focustrack x || 180 || 59 || -4.1 0.9 0.33 || 0.32 || set focus -0.44/dir X || || 106 || 9h32 || Mars || focustrack x || 180 || 59 || -4.1 0.9 0.33 || 0.32 || set focus -0.81/dir X || || 107 || 9h37 || Mars || focusliss x || 180 || 59 || -4.1 0.9 0.33 || 0.32 || output of focus 1.07. However we did not have the resonances. we fixed it.|| || 108 || 9h55 || Mars || track || 195 || 58 || -4.1 0.9 0.33 || 0.36 || || || 109 || 9h58 || Mars || nkpoint b || 195 || 58 || -4.1 0.9 0.33 || 0.36 || set pointing -3.3 0.6 || || 110 || 10h03 || Mars || focustrack x || 195 || 58 || -3.3 0.6 0.33 || 0.36 || set focus -0.68 /dir X. Problems with TAPAS, we restarted it, it works. || || 111 || 10h08 || Mars || focustrack y || 195 || 58 || -3.3 0.6 0.33 || 0.36 || output focus -0.01 /dir Y. We repeat the focustrack y || || 112 || 10h13 || Mars || focustrack y || 195 || 58 || -3.3 0.6 0.33 || 0.36 || almost same output. set focus -0.09 /dir Y|| || 113 || 10h18 || Mars || focusliss y || 204 || 57 || -3.3 0.6 0.33 || 0.36 || output focus -1.31 /dir Y. The fit is not good. We rely on focustrack.|| || 114 || 10h28 || Mars || nkpoint b || 204 || 57 || -3.3 0.6 0.33 || 0.36 || set pointing -3.5 1.2 go on to geometry session || || 115-117 || 10h35 || Mars || beammap || 211 || 55 || -3.5 1.2 0.33 || 0.36 || || || 118 || 11h32 || Mars || skydip-DIY || 225 || * || -3.5 1.2 0.33 || 0.36 || auto_nk_rta tries to reduce the skydip without success || || 119 || 11h46 || Mars || beammap || 225 || * || -3.5 1.2 0.33 || 0.36 || interrupted because we were not on the source || || 120 || 11h50 || Mars || nkpoint b || 225 || 45 || -3.5 1.2 0.33 || 0.316 || set point -2.3 4.9 || || 121 || 11h55 || Mars || focustrack z || 225 || 55 || -2.3 4.9 0.33 || 0.316 || set focus 0.47 || || 122-124 || 12h00 || Mars || beammap || 225 || 55 || -2.3 4.9 0.47 || 0.316 || pb at the end of the last scan (124), it goes on after the expected end until it was automatically cancelled by Pako (too long last subscan or something approaching). cannot reduce the scan 124 ||